Lift Inverter 6kVA-20kVA
| Range | 3KVA to 80KVA |
| Phase | 3-3 Phase |
| Efficiency | >90% |
| Charger Design | MPPT |
| Inverter Technology | Digital Signal Processing |
| THD | <2% (linear load), <5% (non-linear load) |
| Transient Time | 0ms |
| Output Power Factor | 0.9 |
| Mode | Selectable priority SBG/SGB |
| Display | LCD display |
Enventa Power Technologies' Lift Inverter System is a high-performance solution designed to provide uninterrupted power to lifts, elevators, and other three-phase machinery such as air conditioning units and industrial equipment. Built on advanced sine wave technology, it ensures smooth transitions during power failures, maintaining safety, comfort, and reliability for passengers and equipment alike. The system is available in a wide capacity range from 3KVA to 80KVA, making it suitable for varied load requirements. It comes with a user-friendly LCD display for real-time monitoring, a manual bypass switch for seamless maintenance, and optional features like MODBUS, RS-485, and remote monitoring. Designed to handle regenerative power efficiently, the inverter ensures high energy efficiency and reduced operational costs. With its compact and durable design, Enventa’s Lift Inverter System is the ideal choice for modern buildings that demand silent, eco-friendly, and cost-effective lift backup solutions.
Input
| Charger | IGBT |
| Nominal Input Voltage | 400 / 415 VAC, 3 Phase, 4 Wire (±15%) |
| Input Frequency | 50 Hz ±6% |
Output
| VOC Range | 0 – 900VDC |
| Charge Controller Type | MPPT |
| Charger Topology | BUCK |
| No of MPPT Channels | 1 |
| Max Battery Amps during PV charging | Float Mode |
| Battery Type Supported | SMF/VRLA/Ni-CD and Li-Ion |
| Peak Charging Efficiency | Upto 94% |
Inverter
| Controller | 32bit DSP |
| Waveform | Pure Sine Wave |
| THD | <2% at 100% Linear Load, <5% at 100% Non-Linear Load |
| Crest Factor | 5:1 (Can be Tailored for Higher Crest Factor Requirements) |
| Load Power Factor | 0.9 to Unity |
| Overload Capacity | 125% for 60 seconds, 110% for 10 minutes |
| Change Over Time | 0 sec |
| DG Compatibility | Available |
| Bypass | Manual / Static (Optional) |
Output – AC Mode
| Output Voltage | 220/230V/240V (Factory Settable) +/-1% Static (L-N) |
| Output Frequency | 50Hz +/- 0.1% in Free Running Mode |
Output – Grid Export
| Output Voltage | 220/230V/240V (Factory Settable) +/-1% Static (L-N) |
| Output Frequency | 50Hz +/- 0.1% in Free Running Mode |
Environmental
| Operating Temperature | 0°C ~ 60°C |
| Storage Temperature | -25°C ~ 55°C (without batteries) |
| Relative Humidity | Up to 95 % (Non-Condensing) |
Connectivity
| Communication (all optional) | RS 232 Optional |